com.nestingcalc/calculators

Est-ce que com.nestingcalc/calculators est sûr ?

Au dernier audit MCP Hub, le serveur MCP « com.nestingcalc/calculators » est classé « Non encore testé ». Référencé dans l'annuaire. Seul le pentest comportemental fait foi, et il n'a pas encore été exécuté sur ce serveur. Le verdict est réévalué en continu ; consultez la fiche pour l'état à jour.

Méthode : MCP Hub analyse la description de chaque outil (couche 1) et, pour le verdict fort, exécute le serveur dans une micro-VM isolée avec leurres et réseau bloqué (couche 2). On publie des noms et des compteurs, jamais le contenu brut renvoyé par un outil.

Les 37 outils

• baluster_spacing_calculator≈ 168 tokens

  Equal baluster/spindle spacing for a run: number of balusters, exact gap and positions. Enforces a maximum gap (e.g. the 4-inch / 100 mm sphere code rule).

  Paramètres, retour & exemple (3)

  Paramètres

  • run_mm · number · requis
    Total run length between posts
  • max_gap_mm · number · optionnel
    Maximum allowed gap (100 mm = sphere rule, 102 mm = 4 in)
  • baluster_width_mm · number · requis

  Exemple d'appel

  {"name": "baluster_spacing_calculator", "arguments": {"run_mm": 1, "baluster_width_mm": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• board_feet_calculator≈ 306 tokens

  Calculate board feet and lumber cost (thickness x width x length / 144 in inches). Accepts multiple boards and an optional price quoted per board foot or per MBF (thousand board feet).

  Paramètres, retour & exemple (4)

  Paramètres

  • unit · string · optionnel · in | ft | mm | cm | m
    Unit for board dimensions
  • price · number · optionnel
    Optional price per price_unit
  • boards · array · requis
    Boards (dimensions in the chosen unit)
  • price_unit · string · optionnel · bf | mbf
    Unit the price is quoted in: single board foot or MBF (1,000 bf)

  Exemple d'appel

  {"name": "board_feet_calculator", "arguments": {"boards": []}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• bom_costing≈ 330 tokens

  Bill-of-materials cost roll-up for furniture: buy quantity = net qty x (1 + waste%, verified presets: S4S lumber 18%, rough 28%, nested panels 10%, hardware 3%), line and total costs, cost per product and a selling price from a target margin (price = cost / (1 - margin)).

  Paramètres, retour & exemple (4)

  Paramètres

  • lines · array · requis
  • products · integer · optionnel
    Products this BOM covers
  • margin_pct · number · optionnel
    Target margin on selling price, %
  • labor_per_product · number · optionnel
    Direct labour per product

  Exemple d'appel

  {"name": "bom_costing", "arguments": {"lines": []}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• cbm_shipment≈ 225 tokens

  Packing CBM for cartons: per-line and lot volume (m3), total weight and lot density, with a cube-out / weigh-out verdict against the 40HC balanced density (390 kg/m3 - same presets as container loading).

  Paramètres, retour & exemple (1)

  Paramètres

  • lines · array · requis
    Carton lines

  Exemple d'appel

  {"name": "cbm_shipment", "arguments": {"lines": []}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• cnc_feeds_speeds≈ 233 tokens

  CNC spindle RPM and feed rate from tool diameter, flute count, chip load and cutting speed. Works for routers and mills, metric and imperial.

  Paramètres, retour & exemple (6)

  Paramètres

  • unit · string · requis · metric | imperial
  • flutes · integer · optionnel
  • machine · string · optionnel · router | mill
  • chip_load · number · requis
    Chip load per tooth (mm or inch)
  • cutting_speed · number · requis
    Cutting speed Vc (m/min or ft/min)
  • tool_diameter · number · requis
    Cutter diameter (mm or inch)

  Exemple d'appel

  {"name": "cnc_feeds_speeds", "arguments": {"unit": "metric", "chip_load": 1, "cutting_speed": 1, "tool_diameter": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• container_loading≈ 378 tokens

  How many uniform cartons fit in a shipping container before cube-out or weigh-out. Presets: 20GP (33.2 CBM nominal, 28,200 kg payload), 40GP (67.7 CBM, 26,700 kg), 40HC (76.4 CBM, 68 usable, 26,500 kg) — all editable. Returns max pieces by volume vs weight, the binding limit, balanced density (kg/m3) and containers needed for a planned quantity.

  Paramètres, retour & exemple (9)

  Paramètres

  • container · string · optionnel · 20gp | 40gp | 40hc | custom
  • piece_h_m · number · optionnel
    Carton height (m)
  • piece_l_m · number · optionnel
    Carton length (m)
  • piece_w_m · number · optionnel
    Carton width (m)
  • payload_kg · number · optionnel
    Override max payload (kg); route limits are often lower than the container maximum
  • usable_cbm · number · optionnel
    Override usable/stowable volume (CBM)
  • planned_qty · integer · optionnel
    Planned number of cartons (returns containers needed)
  • kg_per_piece · number · requis
    Mass per carton (kg)
  • cbm_per_piece · number · optionnel
    Volume per carton in CBM (alternative to dimensions)

  Exemple d'appel

  {"name": "container_loading", "arguments": {"kg_per_piece": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• cutting_speed_calculator≈ 189 tokens

  Cutting speed from spindle speed: Vc = pi*D*n/1000 metric (m/min), SFM = pi*D*n/12 imperial. Always also returns the same speed converted to the other unit system. Includes a web_url with the calculation prefilled.

  Paramètres, retour & exemple (3)

  Paramètres

  • rpm · number · requis
    Spindle speed in revolutions per minute
  • unit · string · optionnel · metric | imperial
    Unit system
  • diameter · number · requis
    Tool/workpiece diameter (metric: mm, imperial: inch)

  Exemple d'appel

  {"name": "cutting_speed_calculator", "arguments": {"rpm": 1, "diameter": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• embroidery_resize≈ 151 tokens

  Resize an embroidery design file (PES or DST) by a scale percentage. Returns stitch stats before/after, a density safety verdict (safe within +/-15%) and the resized file as base64.

  Paramètres, retour & exemple (2)

  Paramètres

  • file_base64 · string · requis
    Base64-encoded PES or DST file
  • scale_percent · number · requis
    Target scale in percent, e.g. 80 for -20%

  Exemple d'appel

  {"name": "embroidery_resize", "arguments": {"file_base64": "texte", "scale_percent": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• firewood_calculator≈ 324 tokens

  Convert firewood volume between cord (128 ft3), stere/Raummeter (stacked m3), solid m3 (Festmeter), loose m3 and ft3, with optional weight estimate by wood species (dry/fresh).

  Paramètres, retour & exemple (6)

  Paramètres

  • from · string · requis · stere | cord | loose | ft3
    Input unit: stere = 1 stacked m3, cord = 128 ft3, loose = bulk m3
  • value · number · requis
  • species · string · optionnel · pine | spruce | fir | cedar | poplar | oak-red | oak-white | maple-hard
    Optional species key for weight
  • moisture · string · optionnel · dry | fresh
    fresh = 1.5x weight
  • loose_factor · number · optionnel
    Loose m3 per stacked m3 (1.35-1.55 typical)
  • solid_factor · number · optionnel
    Solid m3 per stacked m3 (Festmeter/Raummeter, 0.65-0.75 typical) - the weight runs off this

  Exemple d'appel

  {"name": "firewood_calculator", "arguments": {"from": "stere", "value": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• flooring_calculator≈ 340 tokens

  Laminate/vinyl plank takeoff: planks, boxes and cost with offcut reuse between rows (best-fit), expansion gap, layout waste presets and direction.

  Paramètres, retour & exemple (12)

  Paramètres

  • layout · string · optionnel · straight | staggered | herringbone | diagonal
  • direction · string · optionnel · length | width
    Plank direction
  • expansion_mm · number · optionnel
  • price_per_m2 · number · optionnel
  • room_width_m · number · requis
  • min_offcut_mm · number · optionnel
    Offcuts shorter than this are not reused
  • price_per_box · number · optionnel
  • room_length_m · number · requis
  • waste_percent · number · optionnel
    Overrides the layout default
  • plank_width_mm · number · requis
  • planks_per_box · integer · optionnel
  • plank_length_mm · number · requis

  Exemple d'appel

  {"name": "flooring_calculator", "arguments": {"room_width_m": 1, "room_length_m": 1, "plank_width_mm": 1, "plank_length_mm": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• glass_price_calculator≈ 332 tokens

  Cut-to-size glass cost and weight estimate: net area with optional waste allowance, weight (2.5 kg/m2 per mm of thickness), material cost from your price per m2, optional polished-edge work per running metre, total and per-piece cost. Includes a web_url with the quote prefilled.

  Paramètres, retour & exemple (7)

  Paramètres

  • quantity · integer · optionnel
    Number of identical panes
  • width_mm · number · requis
    Pane width in mm
  • height_mm · number · requis
    Pane height in mm
  • waste_pct · number · optionnel
    Cutting-waste allowance added on top of net area (%)
  • price_per_m2 · number · requis
    Glass price per square metre
  • thickness_mm · number · requis
    Glass thickness in mm (2-25)
  • edge_price_per_m · number · optionnel
    Polished-edge work price per running metre

  Exemple d'appel

  {"name": "glass_price_calculator", "arguments": {"width_mm": 1, "height_mm": 1, "price_per_m2": 1, "thickness_mm": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• glue_consumption≈ 549 tokens

  Wood adhesive quantity: bond area x spread (g/m2, TDS presets like PVAc D3 175, EGP 250, finger-joint PUR 530) x application faces x waste allowance. Also computes bond area for edge-glued panels (joints from board width) and face lamination lay-ups.

  Paramètres, retour & exemple (8)

  Paramètres

  • faces · string · optionnel · 1 | 2
    1 = single-face, 2 = both mating faces
  • face_lam · object · optionnel
    Face lamination lay-up instead of a direct area
  • waste_pct · number · optionnel
    Application/squeeze-out waste, %
  • edge_panel · object · optionnel
    Edge-glued panel dimensions instead of a direct area
  • spread_gsm · number · requis
    Spread rate g/m2 (PVAc D3 one face ~175, EGP ~250, finger PUR ~530)
  • bond_area_m2 · number · optionnel
    Total bond-line area, m2
  • density_gcm3 · number · optionnel
    Glue density g/cm3 to get litres (PVAc ~1.08)
  • price_per_kg · number · optionnel
    Glue price per kg

  Exemple d'appel

  {"name": "glue_consumption", "arguments": {"spread_gsm": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• green_log_weight≈ 261 tokens

  Weight of a roundwood/log batch at any moisture content: W = volume x basic density x (1 + MC/100), per USDA Wood Handbook 2021 Ch.4. Presets for 14 verified species (acacia, rubberwood, eucalyptus, oak, teak, spruce...) or a custom basic density. Returns oven-dry mass, water mass and tonnes.

  Paramètres, retour & exemple (4)

  Paramètres

  • mc_pct · number · optionnel
    Moisture content % oven-dry basis; defaults to the species' freshly-felled MC (~73% acacia, ~75% rubberwood)
  • species · string · optionnel
    Species key, e.g. acacia-mangium, rubberwood, white-oak, teak
  • volume_m3 · number · requis
    Roundwood volume in m3 (Hoppus true, Huber or JAS volume)
  • basic_density_kg_m3 · number · optionnel
    Custom basic density (oven-dry kg per green m3); overrides the species preset

  Exemple d'appel

  {"name": "green_log_weight", "arguments": {"volume_m3": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• hoppus_volume≈ 256 tokens

  Hoppus (quarter-girth) volume of round logs from mid-length circumference and length: (C/4)^2 x L. Returns Hoppus volume, true volume (x 4/pi), Hoppus tons (50 h ft3) and a board-feet approximation, with optional quantity and value per Hoppus unit.

  Paramètres, retour & exemple (5)

  Paramètres

  • qty · integer · optionnel
  • unit · string · optionnel · imperial | metric
    imperial: circumference in inches, length in feet; metric: cm and m
  • length · number · requis
    Log length (ft or m)
  • circumference · number · requis
    Circumference at mid-length (in or cm)
  • price_per_hoppus_unit · number · optionnel
    Optional value per Hoppus ft3/m3

  Exemple d'appel

  {"name": "hoppus_volume", "arguments": {"length": 1, "circumference": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• jas_log_scale≈ 244 tokens

  Japanese Agricultural Standard (JAS) log scale: official diameter rounding (floor to 1 cm below 14 cm, even 2 cm at 14 cm and above), oval-log averaging, optional +2 cm ovality adjustment and the length allowance for logs over 6 m. Volume per log and totals in m3.

  Paramètres, retour & exemple (5)

  Paramètres

  • qty · integer · optionnel
  • length_m · number · requis
    Log length in meters
  • oval_adjust · boolean · optionnel
    Add the +2 cm ovality adjustment
  • diameter_long_cm · number · optionnel
    Long-axis diameter for oval logs (cm)
  • diameter_small_cm · number · requis
    Short-axis diameter in cm

  Exemple d'appel

  {"name": "jas_log_scale", "arguments": {"length_m": 1, "diameter_small_cm": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• kiln_capacity≈ 269 tokens

  Kiln charge capacity: wood volume per batch (AH-188 / TechDrying). V_wood = D×R×C × t/(t+s) × f where t=board thickness, s=sticker thickness, f=fill factor (0.85–0.95). Returns wood volume in m³ and board feet (1 m³ = 423.77 BF).

  Paramètres, retour & exemple (6)

  Paramètres

  • width_m · number · requis
    Stack width, m
  • height_m · number · requis
    Stack height, m
  • length_m · number · requis
    Stack length, m
  • fill_factor · number · optionnel
    Stack fill factor 0–1, default 0.9
  • board_thickness_mm · number · requis
    Average board thickness, mm
  • sticker_thickness_mm · number · requis
    Sticker thickness, mm (default 19)

  Exemple d'appel

  {"name": "kiln_capacity", "arguments": {"width_m": 1, "height_m": 1, "length_m": 1, "board_thickness_mm": 1, "sticker_thickness_mm": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• linear_cutting_optimizer≈ 371 tokens

  Optimize 1D cutting plans for bars, pipes and profiles (linear cutting stock problem, best-fit decreasing heuristic). Returns bars used, per-bar cut lists with positions, total waste and unplaced parts. A web_url with the plan prefilled is included for a visual SVG diagram.

  Paramètres, retour & exemple (6)

  Paramètres

  • kerf · number · optionnel
    Saw blade width consumed by each cut
  • trim · number · optionnel
    Unusable trim at bar ends
  • unit · string · requis · mm | cm | m | in | ft
    Unit for all lengths
  • parts · array · requis
    Parts to cut
  • stock_count · integer · optionnel
    How many stock bars are available
  • stock_length · number · requis
    Length of one stock bar

  Exemple d'appel

  {"name": "linear_cutting_optimizer", "arguments": {"unit": "mm", "parts": [], "stock_length": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• log_volume≈ 248 tokens

  Cubic volume of a log by classical formula: Huber (mid diameter only), Smalian (both end diameters) or Newton (all three, most accurate). Metric (cm, m) or imperial (in, ft); returns volume in m3 and ft3.

  Paramètres, retour & exemple (6)

  Paramètres

  • unit · string · optionnel · metric | imperial
    metric: diameters in cm, length in m; imperial: in and ft
  • length · number · requis
  • method · string · optionnel · huber | smalian | newton
  • diameter_mid · number · optionnel
    Mid-length diameter (huber/newton)
  • diameter_large · number · optionnel
    Large-end diameter (smalian/newton)
  • diameter_small · number · optionnel
    Small-end diameter (smalian/newton)

  Exemple d'appel

  {"name": "log_volume", "arguments": {"length": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• lumber_weight_calculator≈ 284 tokens

  Weight of lumber by species, dimensions, quantity and moisture (dry/fresh), using species density tables. Optional custom density in kg/m3.

  Paramètres, retour & exemple (7)

  Paramètres

  • qty · integer · optionnel
  • species · string · requis · pine | spruce | fir | cedar | poplar | oak-red | oak-white | maple-hard
    Wood species key
  • length_m · number · requis
  • moisture · string · optionnel · dry | fresh
    fresh (green) wood uses 1.5x density (+50% weight)
  • width_mm · number · requis
  • thickness_mm · number · requis
  • custom_density_kg_m3 · number · optionnel
    Overrides species density

  Exemple d'appel

  {"name": "lumber_weight_calculator", "arguments": {"species": "pine", "length_m": 1, "width_mm": 1, "thickness_mm": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• manufacturing_yield≈ 218 tokens

  Cumulative yield through a wood production chain (sawing -> drying -> machining -> finishing). Multiplies stage yields, shows per-stage loss and computes the roundwood volume needed for a target finished volume.

  Paramètres, retour & exemple (2)

  Paramètres

  • stages · array · requis
    Production stages in process order
  • target_output_m3 · number · optionnel
    Finished volume wanted, m3 (reverse mode)

  Exemple d'appel

  {"name": "manufacturing_yield", "arguments": {"stages": []}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• metal_weight_calculator≈ 310 tokens

  Weight of metal stock per profile: pipe/tube (OD + wall), round bar, square/rectangular tube, flat bar, angle, beam/I-beam. Materials: steel, stainless, aluminum, copper, brass.

  Paramètres, retour & exemple (9)

  Paramètres

  • qty · integer · optionnel
  • od_mm · number · optionnel
    pipe/round-bar: outer diameter
  • web_mm · number · optionnel
    beam: web thickness
  • profile · string · requis · pipe | round-bar | square-tube | rect-tube | flat-bar | angle | beam
  • wall_mm · number · optionnel
    pipe/tubes: wall thickness
  • length_m · number · requis
    Length in meters
  • material · string · requis · steel | stainless | aluminum | copper | brass
  • width_mm · number · optionnel
    rect-tube/flat-bar/angle/beam: width
  • height_mm · number · optionnel
    rect-tube/beam: height

  Exemple d'appel

  {"name": "metal_weight_calculator", "arguments": {"profile": "pipe", "length_m": 1, "material": "steel"}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• miter_angle_calculator≈ 226 tokens

  Miter angles three ways: corner mode (any corner angle between two pieces), sides mode (regular polygon with N sides), crown mode (miter + bevel for crown molding at a spring angle).

  Paramètres, retour & exemple (4)

  Paramètres

  • mode · string · requis · corner | sides | crown
    Calculation mode
  • sides · integer · optionnel
    sides mode: number of sides of the frame/polygon
  • corner_angle_deg · number · optionnel
    corner mode: interior corner angle, e.g. 90 or 135
  • spring_angle_deg · number · optionnel
    crown mode: spring angle, typically 38 or 45

  Exemple d'appel

  {"name": "miter_angle_calculator", "arguments": {"mode": "corner"}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• moisture_content≈ 303 tokens

  Wood moisture content (WH-2021 Ch.4 Eq. 4-1..4-4). Two modes: (1) sample-based MC_od/MC_wb from wet+dry masses; (2) drying outcome — mass + water lost when going from start MC to target MC. Optional Gb (kg/m³) returns MCmax and MCsink. Basis 'od' (oven-dry, industry default) or 'wb' (wet).

  Paramètres, retour & exemple (8)

  Paramètres

  • mode · string · optionnel · sample | drying | max
  • basis · string · optionnel · od | wb
  • dry_mass · number · optionnel
    Oven-dry mass of sample (sample mode)
  • wet_mass · number · optionnel
    Wet mass of sample (sample mode)
  • end_mc_pct · number · optionnel
    Target MC after drying, %
  • start_mass · number · optionnel
    Mass at start of drying (drying mode)
  • start_mc_pct · number · optionnel
    MC at start of drying, %
  • basic_density_kg_m3 · number · optionnel
    Basic density kg/m³ for MCmax/MCsink (max mode)

  Exemple d'appel

  {"name": "moisture_content", "arguments": {"mode": "sample", "basis": "od", "dry_mass": 1, "wet_mass": 1, "end_mc_pct": 1, "start_mass": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• paint_coverage≈ 330 tokens

  Wood finishing paint quantity. Technical route: theoretical coverage = 10 x %volume solids / DFT(um), multiplied by transfer efficiency (conventional spray 30-35%, airless ~50%, HVLP ~65-90%, brush/roller ~90%); or a data-sheet coverage in m2/L. Adds an optional extra % for carved/3D surfaces.

  Paramètres, retour & exemple (8)

  Paramètres

  • coats · integer · requis
    Number of coats
  • area_m2 · number · requis
    Surface to coat, m2 (flat projected area)
  • solids_pct · number · optionnel
    Volume solids % (mode B)
  • dft_microns · number · optionnel
    Target dry film thickness um (mode B)
  • price_per_l · number · optionnel
    Coating price per litre
  • shape_extra_pct · number · optionnel
    Extra % for 3D surfaces
  • transfer_eff_pct · number · optionnel
    Transfer efficiency % (mode B; HVLP ~70)
  • coverage_m2_per_l · number · optionnel
    Data-sheet coverage m2/L (mode A)

  Exemple d'appel

  {"name": "paint_coverage", "arguments": {"coats": 1, "area_m2": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• rebar_takeoff≈ 190 tokens

  Rebar weight takeoff (d2/162 rule): total length, weight in kg and bars per tonne for a list of rebar lines. Supports metric mm bars and US # sizes as diameters.

  Paramètres, retour & exemple (1)

  Paramètres

  • lines · array · requis
    Rebar lines

  Exemple d'appel

  {"name": "rebar_takeoff", "arguments": {"lines": []}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• rough_sizing≈ 395 tokens

  Rough sizing — convert between finished (planed, kiln-dried) and rough-sawn dimensions before drying and planing. Adds planing allowance (default 2.5 mm/face) + saw kerf (default 2.2 mm band) and applies WH-2021 Eq. 4-9 shrinkage. Direction: tangential (board width) or radial (board thickness).

  Paramètres, retour & exemple (11)

  Paramètres

  • mode · string · optionnel · forward | reverse
  • kerf_mm · number · optionnel
    Saw kerf, mm (default 2.2 band)
  • species · string · optionnel
    Species key for shrinkage (e.g. 'white-oak')
  • rough_mm · number · optionnel
    Rough-sawn dimension mm (reverse mode)
  • direction · string · requis · tangential | radial
  • planing_mm · number · optionnel
    Planing allowance per face, mm (default 2.5)
  • finished_mm · number · optionnel
    Finished dimension mm (forward mode)
  • sawn_mc_pct · number · requis
    MC at which the wood is sawn, %
  • custom_fsp_pct · number · optionnel
    Custom FSP %, default 30
  • finished_mc_pct · number · requis
    Target finished MC, %
  • custom_shrink_od_pct · number · optionnel
    Custom S_od % (used if no species)

  Exemple d'appel

  {"name": "rough_sizing", "arguments": {"direction": "tangential", "sawn_mc_pct": 1, "finished_mc_pct": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• rpm_calculator≈ 199 tokens

  Spindle speed (RPM) from cutting speed: n = Vc*1000/(pi*D) metric, n = Vc*12/(pi*D) imperial. Metric takes diameter in mm and Vc in m/min; imperial takes diameter in inches and Vc in SFM. Includes a web_url with the calculation prefilled.

  Paramètres, retour & exemple (3)

  Paramètres

  • unit · string · optionnel · metric | imperial
    Unit system
  • diameter · number · requis
    Tool/workpiece diameter (metric: mm, imperial: inch)
  • cutting_speed · number · requis
    Cutting speed (metric: m/min, imperial: SFM)

  Exemple d'appel

  {"name": "rpm_calculator", "arguments": {"diameter": 1, "cutting_speed": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• sawmill_recovery≈ 246 tokens

  Sawmill recovery rate (lumber recovery factor): sawn volume out / roundwood volume in, benchmarked against FAO/EU/SE-Asia reference ranges. Also computes log-rule overrun/underrun: (actual BF - rule BF) / rule BF — Doyle underestimates small logs, so overrun is usually positive.

  Paramètres, retour & exemple (4)

  Paramètres

  • actual_bf · number · optionnel
    Optional: board feet actually sawn — enables the overrun calculation
  • log_rule_bf · number · optionnel
    Optional: board feet predicted by the log rule (Doyle/Scribner/International)
  • input_volume_m3 · number · requis
    Roundwood volume in (m3)
  • output_volume_m3 · number · requis
    Sawn lumber volume out (m3)

  Exemple d'appel

  {"name": "sawmill_recovery", "arguments": {"input_volume_m3": 1, "output_volume_m3": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• sheet_cutting_optimizer≈ 642 tokens

  Optimize 2D guillotine cutting plans for plywood, MDF, glass, sheet metal (2D nesting with kerf, per-part rotation lock for grain direction, optional sheet trim and multiple stock sizes). Returns sheets used, piece positions, utilization, estimated cut length/count and unplaced pieces. Includes a web_url with the plan prefilled for a visual layout diagram.

  Paramètres, retour & exemple (9)

  Paramètres

  • kerf · number · optionnel
    Blade/saw width consumed by each cut
  • unit · string · requis · mm | cm | m | in | ft
    Unit for all dimensions
  • pieces · array · requis
    Pieces to cut
  • stocks · array · optionnel
    Optional mixed stock sizes; replaces stock_width/stock_height/stock_count when given
  • trim_x · number · optionnel
    Symmetric trim removed from left/right sheet edges (damaged edges)
  • trim_y · number · optionnel
    Symmetric trim removed from top/bottom sheet edges
  • stock_count · integer · optionnel
    How many sheets are available
  • stock_width · number · requis
    Sheet width
  • stock_height · number · requis
    Sheet height

  Exemple d'appel

  {"name": "sheet_cutting_optimizer", "arguments": {"unit": "mm", "pieces": [], "stock_width": 1, "stock_height": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• sheet_metal_gauge≈ 249 tokens

  Convert sheet metal gauge to thickness (mm) or thickness to gauge, and compute sheet weight for steel, stainless, aluminum or galvanized steel.

  Paramètres, retour & exemple (7)

  Paramètres

  • qty · integer · optionnel
  • mode · string · optionnel · gauge | mm
    gauge: from gauge number; mm: from thickness
  • gauge · integer · optionnel
    gauge mode: gauge number, e.g. 16
  • material · string · optionnel · steel | stainless | aluminum | galvanized
  • width_mm · number · optionnel
  • length_mm · number · optionnel
  • thickness_mm · number · optionnel
    mm mode: thickness in mm

  Exemple d'appel

  {"name": "sheet_metal_gauge", "arguments": {"qty": 1, "mode": "gauge", "gauge": 1, "material": "steel", "width_mm": 1, "length_mm": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• stowage_factor≈ 149 tokens

  Stowage factor SF = cargo volume (m3) / cargo mass (tonnes), with classification against the IMO CSS Code Table 4.1 reference ranges for wood cargoes (sawn timber, tropical logs, plywood...).

  Paramètres, retour & exemple (2)

  Paramètres

  • tonnes · number · requis
    Total cargo mass in metric tonnes
  • volume_m3 · number · requis
    Total cargo volume in cubic metres

  Exemple d'appel

  {"name": "stowage_factor", "arguments": {"tonnes": 1, "volume_m3": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• tile_calculator≈ 314 tokens

  Tiles, boxes and cost for a room: room and tile dimensions, grout width, waste factor by layout pattern (straight, offset, diagonal, herringbone...), optional box size and prices.

  Paramètres, retour & exemple (10)

  Paramètres

  • layout · string · optionnel · straight | offset | diagonal | herringbone | large-format | natural-stone
    Layout pattern (sets default waste factor)
  • box_size · integer · optionnel
    Tiles per box
  • grout_mm · number · optionnel
  • price_per_m2 · number · optionnel
  • room_width_m · number · requis
  • price_per_box · number · optionnel
  • room_length_m · number · requis
  • tile_width_mm · number · requis
  • waste_percent · number · optionnel
    Overrides the layout default
  • tile_length_mm · number · requis

  Exemple d'appel

  {"name": "tile_calculator", "arguments": {"room_width_m": 1, "room_length_m": 1, "tile_width_mm": 1, "tile_length_mm": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• timber_beam_capacity≈ 293 tokens

  Allowable load on a simply supported rectangular timber beam (planning estimate, Eurocode 5 conventions, EN 338 grades C16-D40/D24-D40). Returns allowable UDL and center point load (gross and net of self-weight), governing mode (bending vs deflection at L/300), utilization, section properties. NOT a structural design - verify with an engineer. Includes a web_url with the beam prefilled.

  Paramètres, retour & exemple (5)

  Paramètres

  • grade · string · requis · C16 | C18 | C24 | C30 | C35 | C40 | D24 | D30
    Timber grade (EN 338)
  • span_mm · number · requis
    Clear span between supports in mm
  • width_mm · number · requis
    Beam width b in mm
  • height_mm · number · requis
    Beam depth h in mm (strong axis)
  • load_type · string · optionnel · udl | point
    Load type of interest

  Exemple d'appel

  {"name": "timber_beam_capacity", "arguments": {"grade": "C16", "span_mm": 1, "width_mm": 1, "height_mm": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• timber_unit_converter≈ 232 tokens

  Convert timber quantities between m3, ft3, board feet, MBF, Hoppus ft3, Hoppus m3 and Hoppus tons, and translate a price quoted in any unit into $/m3 and $/MBF (1 MBF = 2.3597 m3).

  Paramètres, retour & exemple (5)

  Paramètres

  • qty · integer · optionnel
    Multiplier (number of lots)
  • from · string · requis · m3 | ft3 | bf | mbf | hft3 | hm3 | ht
    Source unit
  • price · number · optionnel
    Optional price per price_per unit
  • value · number · requis
    Quantity in the source unit
  • price_per · string · optionnel · m3 | ft3 | bf | mbf | hft3 | hm3 | ht

  Exemple d'appel

  {"name": "timber_unit_converter", "arguments": {"from": "m3", "value": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• wallpaper_calculator≈ 257 tokens

  Wallpaper rolls needed for a wall, accounting for pattern repeat and openings. Use a standard roll preset (eu, us-single, us-double, commercial54) or custom roll dimensions.

  Paramètres, retour & exemple (7)

  Paramètres

  • openings_m2 · number · optionnel
    Area of doors/windows to subtract
  • roll_preset · string · optionnel · us-single | us-double | eu | commercial54
  • roll_width_m · number · optionnel
    Custom roll width (overrides preset)
  • wall_width_m · number · requis
  • roll_length_m · number · optionnel
    Custom roll length (overrides preset)
  • wall_height_m · number · requis
  • pattern_repeat_m · number · optionnel
    Pattern repeat length

  Exemple d'appel

  {"name": "wallpaper_calculator", "arguments": {"wall_width_m": 1, "wall_height_m": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• wood_emc≈ 218 tokens

  Equilibrium moisture content (EMC) from temperature and RH using the Hailwood–Horrobin sorption model (Simpson 1973 coefficients, desorption branch — WH-2021 Ch.4 Table 4-2). Optional reverse mode: target MC → required RH at the given temperature.

  Paramètres, retour & exemple (5)

  Paramètres

  • mode · string · optionnel · emc | reverse
  • branch · string · optionnel · desorption | adsorption
  • rh_pct · number · optionnel
    Relative humidity, 0–100 (emc mode)
  • temp_c · number · requis
    Air temperature, °C
  • target_mc_pct · number · optionnel
    Target MC % (reverse mode)

  Exemple d'appel

  {"name": "wood_emc", "arguments": {"temp_c": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

• wood_shrinkage≈ 324 tokens

  Wood shrinkage from a start MC to an end MC (WH-2021 Eq. 4-9: S_x = S_od × (1 − x/FSP)). Direction: tangential (board width) or radial (board thickness) or volumetric. Picks a species from the wood-species table (16 verified species) or accepts custom S_od + FSP. MC is clamped to FSP — above FSP wood doesn't change dimension.

  Paramètres, retour & exemple (7)

  Paramètres

  • species · string · optionnel
    Species key, e.g. 'white-oak', 'rubberwood'
  • direction · string · requis · tangential | radial | volumetric
  • end_mc_pct · number · requis
    Target MC, %, must be ≤ start_mc_pct
  • dimension_mm · number · requis
    Original dimension in mm (width, thickness, or volume)
  • start_mc_pct · number · requis
    Starting MC, %
  • custom_fsp_pct · number · optionnel
    Custom FSP %, default 30 (22 for teak)
  • custom_shrink_od_pct · number · optionnel
    Custom green→OD shrinkage %, used if no species

  Exemple d'appel

  {"name": "wood_shrinkage", "arguments": {"direction": "tangential", "end_mc_pct": 1, "dimension_mm": 1, "start_mc_pct": 1}}

  Exemple de retour

  {"content": [{"type": "text", "text": "…"}]}

C'est votre serveur ?

Revendiquez-le sur l'espace créateur (preuve GitHub, domaine ou npm) pour afficher le badge « propriétaire vérifié » et lancer un pentest comportemental à la demande afin d'obtenir le badge « Vérifié ».

Créer un compte / revendiquer →

Source

https://mcp.nestingcalc.com/mcp